7
6. Install the Cover Plates. At right you see two plates
that came with the burner pan. The round plate is to be
installed over the Main Burner Orifice (as shown in
photo at far right). The plate does not need to be secured
to the pan with screws.
Next install the rectangular shaped cover plate over the
opening next to the Pilot Burner cage. This plate should
be secured to the pan using the stainless steel screws
supplied.
5. Install the Burner Pan, bring the Pilot Burner Cage up through the
Pilot Burner opening in the pan and secure to the pan using the stainless
steel screws supplied. See photo at right.
7. Install the Main Burner. It is recommended using either Teflon tape
or Pipe dope on the Main Burner orifice prior to installing the Main
Burner. Position the Burner such that a part of the burner is within 2”
of the Pilot Burner Cage.
8. Install acceptable media on top of the fire ring. “Acceptable”
media for fire features is covered on the next page.
“L” Shaped
Pilot Burner
Opening
