10
2. Turn fire feature on by turning the ON/OFF Switch to the ON position.
Sequence of Operation during Ignition
- Switch On: LED light begins flashing green indicating ignition is about to begin
- Gas Valve opens and spark ignition begins
- Ignition occurs almost immediately (assuming gas is present)
Fire Feature Shutdown
Turn fire feature off by turning the ON/OFF Switch to the OFF position.
1.
Maintenance
Prior to Each Use
1.
Inspect for debris in Fire Feature – remove debris prior to use
Semi-Annually
1.
Visually inspect Pilot Burner for debris/insect infestation (spider webs)
2.
Visually inspect burner holes for debris/insect infestation
3.
Clean either of the above as necessary using compressed air.
Annually
1.
Visually inspect Pilot Burner for excess corrosion due to heat and moisture.
2.
Turn fire feature on to ensure proper operation.
WARNING
Maintenance should be done by a qualified service technician.
The appliance should be inspected before use and at least annually by a qualified service technician.
WARNING
Ensure gas and power are shut off and appliance is cool before servicing.
WARNING
Any guard or protective device removed for servicing must be replaced prior to operation.
WARNING
If fire feature fails to turn off completely (small flames still visible)
Turn off gas supply using the manual gas shutoff.
