11
Troubleshooting
The LED light incorporated in the ON/OFF Switch is programmed to indicate failure modes within the
Battery Powered AWEIS System. Assuming there is a good gas source supplying gas to the feature
the system should operate normally. If it does not the indications from the LED will help troubleshoot
the problem. Below is a table showing the different LED Light Flash Sequences programmed into the
system. Use this table to diagnose what is going on with the system.
Item Letter
Part Name
Part #
A
Pilot Burner Assembly
BPBA
B
Battery Pack Assembly
BPack
C
Rocker Switch Assembly
BRS
D
LED Light Assembly
LED
E
Ignition Control Box
BICB
Replacement Parts
A
B
C
D
E
