START-UP AND OPERATION INSTRUCTIONS
ECOMINI
Rev. 000
18/09/2017
26/37
4.7.7 b BRUSH REPLACEMENT (MACHINE WITH ROTATING SQUEEGEE)
Proceed as follows to replace the brush:
Remove the key from the control panel to prevent unwanted starts
Empty both tanks to reduce the machine weight as much as possible;
Lift the machine from the back and release the brush flange by rotating it anti-clockwise (detail 1-2
and 3 fig. 4.15B);
Position the new brush below the connector and rotate the flange clockwise
\
1
FIGURE N° 4.15.B
2
3
