START-UP AND OPERATION INSTRUCTIONS
ECOMINI
Rev. 000
18/09/2017
18/37
4.5.1 BATTERY INSTALLATION (Battery powered version)
Follow these instructions for battery installation:
Remove the key from the control panel to prevent an unwanted machine power-on;
Undo the side fixings and remove the top tank from the machine (detail 1 fig. 4.4);
Place the battery pack in its special compartment;
Clean the connection surfaces and connect to the machine system (detail 2 fig. 4.4);
N.B.:
the two
black cables identified by the + and
– stickers are the battery charger cables;
Never add distilled water after charging the batteries;
Replace the tank on the machine and close back the special fixings.
4.5.2 BATTERY CHARGER INSTALLATION (Battery-powered version)
The machine is equipped with a built-in battery charger. To charge the batteries:
Select a dry, ventilated place, away from heat sources and corrosive environments;
Unplug the batteries (detail 1 fig. 4.5);
Plug the battery charger into the mains supply via the special cable;
The battery charge state can be monitored via the indicator provided next to the socket; during
charging, the red light is on, when charging is complete, the green light goes on (detail 2 fig. 4.5);
After charging completion, unplug the machine from mains supply and plug the batteries back in
(detail 1 fig. 4.5);
FIGURE N. 4.4
FIGURE N. 4.5
2
1
1
2
