GENERAL INFORMATION
DELUXE 55-60
Rev. 00 del 05/07/04
5/36
Non-respect of instructions included in this manual;
Breaking and/or changes made up without FIORENTINI’s approval;
Not-use of genuine wear parts;
Interventions made up by unauthorised personnel;
Maintenance missing;
Natural calamities.
WARRANTY TERMS
The Ing.O.Fiorentini S.p.A. general terms conditions also apply to the warranty.
The manufacturer cannot be held responsible in any way for damages resulting from unauthorised
modifications made to the appliance, from the use of unsuitable brushes and accessories and after use of
the device other than that intended.
EXCLUSIONS
Warranty does not cover normal wear parts and materials (brushes, squeegee blades, etc…), and those
parts of whom is impossibile to define lifetime in advance.
APPLICATION MODES
In order to establish anomalies causes, so that warranty could be applied, is necessary that defective
components must be sent to FIORENTINI. Repairing or substituting works under warranty will be, by
FIORENTINI’s opinion, made in its own workshop, or by third party on place. Works on place, are supplied
with customer’s energy sources and exceptional equipment to repairing if necessary.
INTERVENTION DEMANDS
Possibile intervention demands have to be addressed to the technical assistence service of FIORENTINI Co.
in writing or by phone, just after a attentive analysis of fault and of causes, so that it would be necessary to
report to the agent the following data:
Machine model,
get from the relative label (point 2.1.);
number,
get from the relative label (point 2.1.);
detailed description of defect and the way it happened;
controls and/or regulations made;
code number and position of possibile defective component, deduced from spare parts list;
Components recognized under warranty are delivered ex works; those ones being substituted are property of
FIORENTINI Co..
GOODS TO BE RETURNED
In case of goods to be returned for warranty replacement, it is necessary to have a written acceptance from
FIORENTINI technical department before sending them.
All defective parts must be carefully packed in order to avoid further damages during transport.
Goods must be shipped ex-warehouse and followed by :
serial number of the equipment where they were installed on;
item code of the defective part;
detailed description of the defect and of the condictions where it happened.
In case of defective electric or electronic goods, please return them separately from other materials,
in order to help us in dividing dangerous wastegoods and recicle the (RAEE) as DER 2002/96/CEE LOW.
The relative label missing will involve the loss of any kind of warranty.
1.5. CONFORMITY DECLARATION
Conformity declaration is consigned with the support and the manual of operating and maintenance
instructions.
