INSTRUCTIONS FOR STARTING AND USE
DELUXE 55-60
Rev. 00 del 05/07/04
24/36
4.7.4 RUDDER PEDALS FUNCTIONS
This machine is equipped with different levers and pedals:
Accelerator lever (particular 1 picture 4.9). Pulling by the right hand this lever is possible to get the
gear, forward or reverse depending on the position of the gear selector (particular 2 picture 4.9).
The accelerator pedal activate all the moving parts of the machine. When switched on, with
the on board operator, brushes start to move and the suction motor activated by the control
bridge. This pedal doesn’t operate on the water solenoid valve that must be open and closed
by the operator.
Emergency/stop brake (particular 3 picture 4.9). Its function is to reduce until stop, the machine gear.
This lever works also as a stop brake. Pull up to the bottom the brake lever to block it, pull up the
brake and push the red botton to unblock it.
Lifting up squeegee lever (particular 4 picture 4.9). Pulling up this one and putting it to its place is
possible to control the squeegee.
Lifting up brush holding plate pedal (particular 5 picture 4.9). Pushing the pedal and putting it to its
place is possibile to keep high the brush plate, to pull it down push the pedal to release it and let the
pedal to stop running.
Water floating regulation (particular 6 picture 4.9). Pulling up or down the lever to get a good
regualtion of the water.
6
1
5
4
3
2
