16
17
TOOLS YOU WILL NEED
1. ADJUST THE REGULATOR
A.
Disconnect all electrical power at the main circuit breaker or fuse box.
B.
Shut off the gas supply to the appliance by closing the manual shut-off valve.
C.
Adjust the pressure regulator by doing the following:
FIGURE A FIGURE B
For Natural Gas usage the retainer pin will look like this.
(See Figure B)
FIGURE D
Unscrew the cap with a Crescent wrench.
(See Figure A)
Remove the retainer pin.
(See Figure C)
Proceed to reverse the retainer pin and place it back into the regu-
lator cap. This is how the regulator pin looks for LP gas usage.
(See Figure
D)
FIGURE E
5) Screw the regulator cap back into the regulator and re-at-
tach the regulator to the nipple and flare
union.
(See Figure
E)
FIGURE C
