16
17
LP GAS CONVERSION
If sold outside the U.S. and Canada:
WARNING: If you wish to use this product with Liquefied Petroleum (LP) gas containing greater than 10%
bu-
tane, you must purchase the butane conversion kit.
SAFTY INFORMATION
The pressure regulator and burner orifices are set for natural gas
operation.
To convert this cooktop from natural gas operation to LP operation, the regulator and burner orifices must be
convert-
ed.
LP burner orifices are attached to the
regulator.
This appliance can be used with Natural Gas or LP/Propane Gas. It is shipped from the factory for use with Natural Gas. A kit
for converting to LP gas is supplied with your appliance. The kit is marked “FOR LP/PROPANE GAS CONVERSION”.
When the range is converted for Liquid Petroleum (LP) Gas, the LP gas supply is required to provide a minimum
of 10” to a maximum of 14” water column to the range regulator.
CAUTION — The cooktop, as shipped from the factory, is set for use with its intended gas. If you wish to use
your cooktop with the alternate gas, you must first replace the orifices and convert the pressure
regulator.
WARNING — This conversion must be performed by a qualified installer or gas supplier in accordance
with
the manufacturer’s instructions and all codes and requirements of the authority having jurisdiction. Failure to
follow
instructions could result in serious injury or property damage. The qualified agency performing this work
assumes responsibility for the conversion.
CAUTION — The following adjustments must be made before turning on the burner. Failure to do so could
result in serious injury. Be sure pressure regulator has been converted as described in Step 1.
