Finn HydroSeeder TITAN280, Инструкция оператора и каталог запасных частей

Страница: 19 / 87

13
0 2000 4000
1800 RPM
ENG RPM COOL TEMP
MENU
KEY
GO TO 4-UP DISPLAY
ENGINE CONFGURATION
STORED FAULT CODES
ADJUST BACKLIGHT
ADJUST CONTRAST
SELECT UNITS
SETUP 1-UP DISPLAY
ENTER
KEY
0 RPM
ENG RPM
0 PSI
OIL PRES
46F
COOL TEMP
12.3 VDC
BAT VOLT
MENU
KEY
Faceplate
The keypad on the PowerView is a capacitive touch-sensing system. There are no mechanical switches
to stick or wear out. It can be operated in extreme temperatures, while wearing gloves, and is impervi-
ous to ice, snow, mud, grease, etc. When the key is touched, feedback is provided by flashing on the
screen. The keys on the keypad perform the following functions (refer to Figure 9 page 12):
Menu Key
The Menu Key is used to either enter or exit the menu screens.
Left Arrow Key
The Left Arrow Key is used to scroll through the screen, either moving the parameter
selection towards the left or upward.
Right Arrow Key
The Right Arrow Key is used to scroll through the screen, either moving the parameter
selection towards the right or downward.
Enter Key
The Enter Key is used to select the parameter that is highlighted on the Screen.
POWERVIEW OPERATION
PowerView Menus (First Time Start-Up)
1. Once the engine has been started and the
keyswitch is turned to RUN, the rpm Engine
Parameter is displayed. See Figure 10.
2. To toggle through the various engine param-
eters, touch either the Left or Right Arrow
Key.
3. To switch to the 4-UP DISPLAY, touch the
Menu Key to display the first seven items of
the Main Menu. See Figure 11.
4. Since the first menu item listed is GO TO
4-UP DISPLAY, touch the Enter Key to select
the four parameter display.
To
Figure 10 – 1-Up Display
Figure 11 – Main Menu Figure 12 – 4-Up Display