Finn HydroSeeder TITAN280, Инструкция оператора и каталог запасных частей

Страница: 17 / 87

11
1. DISCHARGE THROUGH BOOM:
Flow is through boom with no flow through closed recir-
culation valve (Figure 6). Flow through boom is controlled
by engaging and disengaging slurry pump clutch.
NOTE:
Do not use the discharge valve to control dis-
tance. Valve should be completely open. Control the
spray volume and spray distance by adjusting the engine
RPM.
2. EXTENSION HOSE THROUGH BOOM:
Flow is through boom with no flow through closed recir-
culation valve (Figure 6). Extension hose is connected to
boom and flow is controlled by engaging and disengag-
ing pump clutch or by adjusting engine RPM.
DANGER
Do not use remote valve in this application. Failure to comply will result in death or serious
injury.
3. EXTENSION HOSE OR HOSE REEL THROUGH REMOTE PORT:
Flow is through recirculation with no flow through closed discharge valve (Figure 7). Flow through
hose is controlled by engaging and disengaging slurry pump clutch or by remote valve at end of hose.
An open recirculation valve allows flow back into tank when the remote valve is closed.
DANGER
Ensure that the Recirculation valve must is open and material is flowing back into tank when
using a remote valve, because a closed or plugged recirculation line will cause extreme heat.
Failure to comply will result in death or serious injury.
Figure 6 – Discharge Through Boom
Figure 7 – Discharge Through Extension Hose or Hose Reel
RECIRCULATION
VALVE
(SHOWN CLOSED)
TANK
CLOSED
POSITION
OPEN
FLOW
TANK
HANDLE IN
OPEN POSITION
CLOSED
FLOW
FLOW