9
MOUNTING THE HYDROSEEDER
®
When mounting the HydroSeeder
®
to a truck or trailer, follow the acceptable mounting method
below.
Bolt the HydroSeeder
®
directly to the truck or trailer bed. Installer must ensure that the bed, as
well as the bed-to-truck and HydroSeeder
®
-to-bed connections are adequate for the maximum
weights that are shown in the CARRIER VEHICLE REQUIREMENTS section.
This machine is equipped with two styles of lifting devices:
forklift channels and a lift ring. Do NOT lift unit with water or
material in it. The lifting devices are designed to carry only the empty weight of the
machine. Failure to comply will result in severe personal injury or death and potential
equipment damage.
When using a truck with a tilt bed, make sure to chain the truck bed
down to prevent the bed from being accidentally hoisted. Failure to
comply could result in minor or moderate personal injury. Failure to comply could also result
in product or property damage.
ATTACHMENTS (OPTIONAL)
1. Discharge hoses: Discharge hoses are available in 50 ft. (15 m) and 100 ft. (30 m)
lengths, up to a total of 150 ft. (45 m). Hoses of a greater length may adversely affect
the discharge distance and the discharge time of the HydroSeeder
®
. All connections are
camlock quick-operating fittings, including the connection to the end of the discharge
piping. A nozzle is connected to the remote discharge valve which is connected to the
working end of the discharge hose. Once everything is connected, the HydroSeeder
®
is ready to operate. Flow through the hose and nozzle is controlled by the operation
of the remote discharge valve. When using this valve, the recirculation valve on the
HydroSeeder
®
MUST BE OPEN to allow excess material flow back into the tank when the
remote valve is closed (see VALVE OPERATION section and Figure 2).
The recirculation valve must be open when using a remote valve.
Failure to comply will result in death or serious injury.
2. Hose Reel: The live hose reel will mount on top of the HydroSeeder
®
unit. The 100 ft.
(30 m) capacity electric rewind reel will wind up and store empty hose. It is wired to the
unit's battery.
3. Air Gap Fill Pipe Option: A bolt on the air-gap fill pipe is available that mounts directly to
the raised hatch liner and swings into position when the hatch lid is open.
Содержание HydroSeeder T30
Страница 4: ......
