Finn HydroSeeder T170, Руководство по эксплуатации и каталог запасных частей

Страница: 25 / 77

3. When hose operator is ready, signal the second operator to engage clutch and slowly
increase the engine RPM until the desired discharge pressure is reached.
4. When finished spraying, disengage the clutch, stop the engine, and close the discharge valve.
If using fiber mulch, retain as much water as possible in the hose by elevating the hose ends
or by coupling the hose ends together.
5. If another load is to be done, see RELOADING PROCEDURE on page 19. If finished for the
day, follow clean-up procedure and flush out the hose.
C. HOSE WORK WITH RADIO REMOTE:
1. Begin with the engine around 1/4 throttle (1,400 RPM).
2. Close recirculation valve. If using an extension hose connected to the discharge boom, open
the discharge valve. If using the hose reel, close the discharge valve and open the pump
take-off valve to the hose reel.
3. Switch Remote On/Off switch on the control panel to the ON position.
4. When the operator is in position, engage (turn on) pump using the remote transmitter and
increase throttle to the desired output.
NOTICE
To quickly shut off the engine at any time, press the red E-Stop button on the transmitter. To
restart the engine, the key switch on the control panel must be returned to the OFF position
and then re-started.
5. When finished spraying, turn the pump off and decrease the engine throttle to idle.
CAUTION
CAUTION: When using the radio remote control option, the secondary operator(s) must
be aware that the machine can be activated remotely at any time after the Remote On/Off
switch on the control panel is switched ON. If any maintenance or troubleshooting must be
performed while the engine is running, the Remote On/Off switch must be in the OFF posi-
tion. Failure to comply could result in minor personal injury, or product or property damage.
RELOADING PROCEDURE:
1. Start at step 2 in LOADING on page 15.
2. After last load of the day, refer to CLEANING AND MAINTENANCE on pages 23 and 24.
3. If the unit is equipped with an Air Flush System, refer to the Air Flush System Parts and
OPERATOR'S MANUAL.
19