ADJUSTMENT INTERVENTIONS
ADJUSTING THE SQUEEGEE BODY'S RUBBER BLADES
The careful adjustment of the squeegee body rubber blades guarantees better cleaning of the floor.
To adjust the squeegee body blades, proceed as follows:
1. Sit on the driver’s seat.
2. Insert the key (1) into the main switch on the control panel. Bring the main switch to its "I" position by turning the key (1) a quarter turn
clockwise (
Fig.1
).
N.B.:
As soon as the machine turns on, the control board will perform a diagnostics procedure, during which the red LED indicator (2) on
the control panel (
Fig.2
) will remain on.
N.B.:
If the control board's diagnostics procedure returns a positive outcome, the red LED indicator (2) on the control panel (
Fig.2
) will
turn off, and an acoustic signal will sound indicating that the work operations may be initiated.
3. Lower the brush head body by turning the brush head control lever (3) on the rear part of the steering column (
Fig.3
).
4. Lower the squeegee body by turning the squeegee control lever (4) on the rear part of the steering column (
Fig.4
).
5. Check to make sure that the detergent solution tap is completely open. If this is not the case, adjust the lever (5) on the left-hand side of the
steering column (
Fig.5
).
6. Press the drive pedal (6) (
Fig.6
) to begin moving the machine.
N.B.:
Once the drive pedal is pressed, the brush head body and the squeegee body will begin to descend into their working positions.
7. As soon as the brush head and the squeegee have reached their working positions, perform the procedure for securing the machine (see
”).
ATTENTION:
these operations must be carried out using protective gloves to avoid any possible contact with the edges or tips of metal
objects.
8. Stand at the back of the machine.
Adjusting the height of the squeegee body:
• Release the stopper lever (7) for the squeegee's height adjustment knob (8) (
Fig.7
).
•
Adjust the height of the rubber blade in relation to the floor by loosening or tightening the knobs (8) (
Fig.8
).
N.B.:
Figure 8 indicates the direction of rotation for decreasing the distance between the squeegee support and the floor. This distance
can be increased by turning it in the opposite direction.
40
21
19
18
19
20
18
17
16
17
14
16
15
16
15
14
11
13
12
13
10
11
12
12
11
10
4
8
9
7
4
7
8
8
9
6
5
5
6
2
3
1
1
2
3
