HOUR METER
The control display is in the control panel, at the top in the middle it is possible to observe the
total time the machine has been used.
The digits that precede the "." symbol identify hours, whilst the digit that follows it indicates hour
decimals (an hour decimal corresponds to six minutes).
When the “hour glass” symbol (1) is flashing it indicates that the hour meter is counting the
appliance's operating time.
BATTERY CHARGE LEVEL INDICATOR
The control display is in the control panel, at the top in the middle it is possible to observe the
charge level of the batteries.
The indicator is composed of two charge level symbols, the first represented by a graphic symbol (2), the second by a number that indicated
the charge percentage (3). With a low charge level the graphic symbol (2) will start to flash and after a few seconds it will switch off, in these
conditions take the machine to the place where its batteries can be charged.
N.B.:
a few seconds after the battery charge reaches the critical level, the brush gear motors switch off automatically. With the remaining
charge it is possible to complete the drying process before starting the recharge.
N.B.:
A few seconds after the battery charge reaches the discharge level, the suction motor switches off automatically.
DRIVE
0000.00
100%
3
2
1
TUTORIAL
The machine's internal memory contains tutorials that explain:
• The initial commissioning of the machine (document in IT-EN-ES-FR-DE).
• The routine maintenance to be carried out (document in IT-EN-ES-FR-DE).
• The machine's use and maintenance manual (document in IT-EN-ES-FR-DE).
To start them do as follows.
1. With the machine on, press the menu button (1) on the working screen (
Fig.1
).
2. Press the TUTORIAL button (2) (
Fig.2
).
N.B.:
to return to the working screen press on any point of the screen, except the edges of the display or else wait three seconds without
touching anything.
3. On the tutorial screen (
Fig.3
) select the topics you want to study:
• Using the machine.
• Daily maintenance.
• Extraordinary maintenance.
N.B.:
select the “USING THE MACHINE” key (A) to view the video explaining the stages for preparing the machine for work (
Fig.3
).
N.B.:
select the “DAILY MAINTENANCE” KEY (B) to view the video explaining the maintenance to be carried out every day (
Fig.3
). When
this button is selected the screen regarding the selection of the videos to view will be displayed (
Fig.4
), you can view the following video
tutorials:
• Draining and cleaning the recovery tank.
• Cleaning the vacuum tube and the squeegee body.
•
Cleaning the vacuum motor filter.
•
Draining and cleaning the solution tank and the water system filter.
N.B.:
select the “EXTRAORDINARY MAINTENANCE” key (C) to see the video explaining the maintenance to be carried out daily (
Fig.3
).
When this button is selected the screen regarding the selection of the videos to view will be displayed (
Fig.4
), you can view the following
video tutorials:
• Replacing the squeegee rubber blades.
• Replacing the brush head brushes.
• Adjusting the squeegee rubber blades.
VIDEO TUTORIAL
Utilizzo della macchina
Manutenzione giornaliera
Interventi straordinari
Back
3
4
C
B
A
OFFICE
0000.00
100%
ECO mode
0000.00
100%
1
2
1
2
30
