N.B.:
each time one of the enabled keys is pressed, it increases the relative level in a cyclical manner. Only the detergent solution
adjustment permits zero level.
N.B.:
to activate or deactivate “MANUAL ZONE” mode, see the programming manual.
ECO mode
0000.00
100%
3
2
4
6
2
1
1
MANUAL
0000.00
100%
3
D
A
C
B
4
Warehouse
Canteen
Office
Reception
Exit
SELEZIONE ZONE
0000.00
100%
5
5
PROGRAM ZONE MODE
MANUAL
0000.00
100%
Warehouse
Canteen
Office
Reception
Exit
SELEZIONE ZONE
0000.00
100%
1
2
1
3
2
The zone programs are programs saved in the machine's memory, the parameter levels:
•
Pressure exercised on the central brush head
•
Forward speed
•
Adjustment of the detergent solution flow
•
Vacuum motor efficiency
These are set and have been created on the basis of the type of environment where you want to work.
To select one of the zone programs, do as follows:
1. From any screen, press the “ZONE” button (1) (
Fig.1
).
2. As soon as the button (1) is pressed, the “ZONE SELECTION” menu will be displayed (
Fig.2
). Select
one of the programs.
N.B.:
the name of the zone program selected is displayed in the text indicator (3) (
Fig.1
).
N.B.:
to exit the zone program: from the programme menu, select the “EXIT” button or enable and then disable the ECO-MODE button.
N.B.:
the light blue ZONE key shows that the selected zone is active, in this case the ECO-MODE button is not active.
N.B.:
to activate or deactivate “PROGRAM ZONE” mode, see the programming manual.
DS SELECTOR (DRIVE SELECT)
Using the DS selector it is possible to select one of the following working programs:
A. Transfer: movement of the machine without working.
B. Scrubbing only : using only the brushes in the brush head.
C. Drying: using the squeegee only.
D. Scrubbing with Drying: using both the brushes and the squeegee.
Pressing one of the symbols in the selector will shift from the working screen (
Fig.1
) to the “DRIVE SELECT” screen (
Fig.2
). On this screen it is
possible to:
1.
Confirm the selected program.
N.B.:
to confirm the program press the icon just selected once again.
N.B.:
once the selection is confirmed you return to the working screen (
Fig.1
).
2. Cancel the selection and return to the working screen
N.B.:
to cancel the selection press the “back” button (1) (
Fig.2
) and you return to the working screen without changing the program being
used.
N.B.:
to cancel the selection wait 5 seconds without selecting anything and you will return to the working screen without changing the
program being used.
3. Select a mode other than the one highlighted.
22
