OV-II Maintenance, Troubleshooting and Service Manual
3-10
Industrial Dynamics Company, Ltd. ©
Form 42600 (10/03)
1. Raise the Inspection Head an remove the starwheel.
2. Remove the three philip head screws. See figure below for screw
location.
3. Remove the lens retaining ring and replace the finish lens.
4. Place retaing ring back in postion with the three screws removed in
step 2.
NECK BELT
To replace the Neck Belt proceed as follows:
1. Raise the Inspection Head.
2. Remove the old neck belt and replace with a new belt.
3. Lower the Inspection Head and manually pass a bottle on the
starwheel through the inspection area.
