Form No. 06-795, Rev. 0 (02/16)
Page 7 of 8
Figure 9 - 20-Zone Remote LED Annunciator Programming
The 20-Zone remote LED annunciator shall be labeled as shown in Figure 10
to indicate the meaning of each LED. If more than one suppression zone is
involved, zone information should be added to the LED labels for clarification.
Design Note:
Where the system incorporates more than one suppression
zone, additional relay modules, monitor modules, and key-switches must be
added for each additional suppression zone. The programming should follow
the same general convention shown in this application guide.
Please feel free to contact Fike’s electrical support at 1-800-979-3453, option
2,1 if you have any questions regarding purge operation with Fike’s Cheetah
Xi or SHP-Pro control panels.
Figure 10 - LED Annunciator Labeling
