Fiilex FLXMXG2, Руководство пользователя

Страница: 2 / 6

Mode
Intensity PWR
DMX
CCT
DMX
Color
Temperature
Hue
HUE
Description
Screen
Indicator
Basic Operation
(refer to Parts Diagram on following page)
• The Matrix II Tunable White has been designed for professional studio and location applications
and may only be operated by qualified persons.
• Please read the following operating instructions very carefully before using this fixture.
• For your own safety, please follow all safety instructions and warnings.
• Keep these operating instructions for future reference.
• For further information, contact Fiilex (fiilex@fiilex.com) or your retailer.
• Powering on the Matrix II Tunable White
The Matrix II Tunable White power adapter includes an AC plug for power input and a 3-Pin XLR
connector for output. To supply the Matrix II Tunable White with power, insert the XLR
connector into the Power Input
(19) , then connect the AC plug into an active wall socket. The
fixture’s OLED Display
(9)
will turn on once it is receiving power. The On/Off Switch
(12)
can
toggle the fixture’s output on and off. Settings can still be adjusted while the switch is set to o
• Mounting the Matrix II Tunable White
The Matrix II Tunable White Baby/Junior Spigot
(5)
can be mounted to baby pins or junior
receivers. Secure the fixture to baby pins with the Spigot Tightening Knob (6) . Remove Spigot
Tightening Knob when mounting to juinor receivers.
• Adjusting the Matrix II Tunable White Fixture
Use the Yoke Tightening Handle
(8)
to lock the fixture’s tilt position. Tighten the handle to secure.
• DMX Interface
The Matrix II Tunable White receives DMX signals via its 5-Pin XLR ports. When a DMX signal is
detected the fixture will automatically enter DMX Mode and manual controls will be deactivated.
To indicate DMX Mode, the OLED Display
(9) will replace the word “LOCAL” with the DMX
address.
• DMX / RDM Support
The Matrix II Tunable White is compatible with DMX/RDM
(Remote Device Management) protocol. With RDM, the DMX address
of the fixture can be changed remotely via the DMX signal.
• USB Interface
The Matrix II Tunable White is equipped with a Mini USB Port (11) for updating firmware. The
standard USB Port (17) provides 5V 1A power for wireless DMX antennas. Please register your
product at www.fiilex.com to be informed when firmware updates are available.
General Notes:
To adjust the brightness of the fixture, simply turn the Light
Intensity / DMX Address Knob (7).
To adjust the color temperature of the fixture, simply turn the
CCT / Hue Tuning Knob (11).
To adjust the hue of the fixture, double click the CCT / Hue
Tuning Knob (11) and turn the knob.
Control via DMX. Manual control knobs disabled. Mode
activates automatically when DMX signal detected.
1