Fiilex FLXMXG2, Руководство пользователя

Страница: 4 / 6

3
Rear Panel Interface Operation
Assigning DMX Address:
DMX Address Setting Screen
Main Screen w/ DMX Mode Active
1. Loosen the lock knob on the
Super Clamp.
2. Hold down the release button and
slide the Super Clamp onto the
Power Adapter mounting pin.
3. Tighten the lock knob on the
Super Clamp.
Hold
Slide
Loosen
Loosen
Remove
4. Use clamp adjustment knob to affix Super
Clamp and Power Adapter to light stand.
Setup Clamp Mount and Power Adapter
Attach Power Adapter to the Yoke
Dial
CCT
PWR
HUE
DMX
Range
2800K - 6500K
100% - 0.1%
± .25 Magenta / Green
1 - 510
Function
Set color temperature
Set intensity
Set HUE value
Set DMX address
CCT PWR HUE
1. Double click the DMX Address Dial (10) to unlock DMX address
setting screen on the OLED Display (9).
2. Rotate the knob to select desired base address (1-510).
3. Lock in setting by clicking knob once. Alternatively, the address will
automatically lock in after 1 second of inactivity.
4. The Matrix II Tunable white occupies three consecutive DMX
channels for operation. With a base DMX address 50, the controls
for intensity, CCT, and hue will correspond to DMX channels 50,
51, and 52 respectively.
•
For adjusting fixture’s DMX address via RDM, consult operating instructions
for DMX/RDM control system.
Remove mounting pin by
loosening 11/16” nut under
Power Adapter mounting plate.
Mount the power adapter onto
the Power Adapter Mounting
Holes (23) on the Yoke (9) with
two 1/4” - 20 screws.
Removal requires 11/16” wrench
that is thin enough to fit under
mounting plate.
Maximum wrench thickness: 8mm