manualshive.com logo in svg

Fiery XJ+ 525, Руководство по установке, Страница: 41 / 160

Поделиться
Скачать
Fiery XJ+ 525 Скачать руководство пользователя страница 41

2

2-5

Fiery XJ Setup from the Control Panel

T

O

 

ACCESS

 S

ETUP

 

WHEN

 

THE

 F

IERY 

XJ 

IS

 

OFF

:

1.

Make sure the Fiery XJ is connected to the copier and to the network you will use.

2.

Turn on the Fiery XJ.

The startup diagnostics are performed.

3.

At the startup message, press any key.

4.

Continue with step 5 from the previous procedure.

Review the settings described in this chapter. For more information on Control Panel 
screens other than those in Setup, see the Job Management Guide.

About the Control Panel Setup interface

When you perform Setup from the Control Panel, you select one menu after another 
and enter information about your Fiery XJ and your network and printing 
environment.

In each Setup screen, the last line of the display window tells you the name of the 
current Setup menu. Most of the menus you see are shown on the Control Panel Map, 
a flowchart that can be printed from the Control Panel.

T

O

 

PRINT

 

THE

 C

ONTROL

 P

ANEL

 M

AP

:

1.

At the Control Panel, press the Menu button to access the Functions menu.

2.

Press the button for Print Pages.

The Control Panel displays the first four types of pages you can print. To see the 
remaining types of pages, press the down button.

3.

Press the button for Control Panel Map.

Содержание XJ+ 525

































































































































































Отзывы:

Нет отзывов