4
4-12
Setting up Network Servers
T
O
ACTIVATE
THE
BINDERY
CONTEXT
:
1.
If you cannot reboot the NetWare server at this point, type the set command manually
at the server’s colon prompt.
Use the same command as you entered in the
AUTOEXEC.NCF
file (in step 6 of the
previous procedure).
2.
If you can reboot the NetWare server, the
set
command is loaded automatically.
You are ready to set up the Fiery XJ print server and print queue. See the next section
for details.
Setting up a NetWare print queue for bindery
For NetWare 3.x and for 4.x in emulation, the NetWare print server and print queue
for Fiery XJ are created and configured from NetWare Print Console (PCONSOLE), a
NetWare utility that is stored in NetWare’s PUBLIC directory.
As with NDS, first you create several NetWare entities on a Novell server, then you
select them in Network Setup on the Fiery XJ Control Panel.
T
O
SET
UP
A
N
ET
W
ARE
SERVER
FOR
PRINTING
TO
THE
F
IERY
XJ:
1.
Log in to the NetWare server as the Supervisor.
2.
At the NetWare MS-DOS prompt, type
pconsole
.
If you are using NetWare 4.x in bindery mode, Print Console (PCONSOLE) has two
modes. Press the F4 key to switch to Bindery mode.
The Available Options menu is displayed.