3
3-20
Using Fiery WebSetup
Convert Paper Sizes
—Specify whether to convert paper sizes in documents
automatically to the default paper sizes specified. For example, if you select
Letter/11x17->A4/A3
, a letter size document is automatically printed on A4 paper.
If you select
No,
the server will only print the document if it finds a media source
in the size specified by the file.
Print Cover Page
—Specify whether the Fiery XJ prints a cover (job summary) page at
the end of each print job. If you select
Yes
, each print job is followed by a page
containing the name of the user who sent the job, the document name, the server
name, the time the job was printed, the number of pages printed, and the status of the
job. If a PostScript error occurs, and the
Print to PS Error
option is set to
Yes
, an error
message takes the place of the job status.
Allow Courier Substitution
—Specify whether to substitute Courier for unavailable
fonts. If this option is set to
No
, jobs with fonts that are not available on the Fiery XJ
hard disk will not print due to a PostScript error.
Print to PS Error
—Specify whether the Fiery XJ should print the available portion of a
print job when it encounters a PostScript error. Select
Yes
to print the portion of the
job that was processed before the error occurred; select
No
to cancel the job entirely
whenever a PostScript error is encountered.
Enable Bypass Tray by Default
—Select
Yes
to specify that jobs should be printed from
the bypass tray. Use this option to enable printing from the bypass tray when tray
selection is not otherwise available in the interface, such as when printing from the
command line (lpd or DOS). In general, select
No
when the interface permits tray
selection on a job-by-job basis.
Detect Black as Default
—Select
Yes,
the default,
to specify that jobs should be scanned
before being printed to detect black-only pages. Black detection allows for accurate
billing of black-and-white pages and increases the printing speed of jobs containing
multiple black-only pages.