manualshive.com logo in svg

Fiery XJ+ 525, Руководство по установке, Страница: 138 / 160

Поделиться
Скачать
Fiery XJ+ 525 Скачать руководство пользователя страница 138

5

5-4

Administering the Fiery XJ

To move or remove queued jobs, use the Command WorkStation or 
Fiery WebSpooler. When you free up disk space by removing inactive jobs, new jobs 
are spooled and printed more quickly.

An internal hard drive upgrade may be available. Check with your service representa-
tive for more information.

Troubleshooting the Fiery XJ

Startup diagnostics are described in the Installation and Service Guide for service 
technicians. Contact your authorized service/support center if you see any startup error 
messages on the Fiery XJ Control Panel or if the Fiery XJ does not reach Idle status.

Troubleshooting during Setup from the Control Panel

The following section explains some error and alert messages that you may see during 
Fiery XJ Setup that might not be self-explanatory.

Network Setup messages

After this Setup screen:

This message:

Means:

Enable AppleTalk
(Network Protocol 
Setup>AppleTalk Setup)

No AppleTalk zone found.

The Ethernet network cable is not attached to the 
connector on the Fiery XJ, or the network cable is not 
plugged into the hub or network. If your AppleTalk 
network has zones, and you want to specify a zone for the 
Fiery XJ, you must connect the network cable to the 
Fiery XJ before performing AppleTalk Setup.
Also could mean that the AppleTalk network doesn’t have 
zones. Zones are not required for printing to the Fiery XJ. 
Press OK to continue.

Protocol Setup or Service 
Setup (Network Setup)

You must first enable
a network port.

Enable at least one network port (Ethernet or Token Ring) 
in Port Setup before beginning Protocol Setup or Service 
Setup.

Содержание XJ+ 525

































































































































































Отзывы:

Нет отзывов