FIC PA-2010+, Руководство пользователя, Страница: 72 / 76

Award BIOS Setup
BIOS Update Instruction
CAUTION : End users are not encouraged to flash the BIOS file; since it
may adversely affect system performance.
The mainboard provides a Flash BIOS. If you have any question about the BIOS
upgrade, please contact your local dealer for more information. The following
instructions are introduced when the upgrade is needed.
1. Create a Bootable Floppy (in DOS) - with a non-formatted diskette, type
format a:/s
. With a formatted diskette, type
sys a:
2. Download the BIOS File - Download the correct BIOS file via FTP, by
clicking on the file name of the BIOS you wish to download. Save the
BIOS file and the Flash Utility file in the boot disk you have created.
Unzip the BIOS file and the Flash Utility file.
There are two files after extraction: Flash BIOS utility, (e.g. flash531.exe),
and BIOS file (e.g. 615J900.bin). Use the standard Flash BIOS utility
(flash531.exe), unless otherwise specified.
Place the bootable floppy disk
containing the BIOS file and the Flash Utility in drive a:, and reboot the
system in MS-DOS, preferably V. 6.22
At the A: > prompt, type the corresponding Flash BIOS utility and the
BIOS file with its extension. For example,
flash531 615j900.bin
From the Flash Memory Write menu, select
Y
to
Do you want to save
BIOS?
If you want to save your current BIOS, then type the current BIOS
name and the extension after
FILE NAME TO SAVE:
. e.g. 613J900.bin
Alternatively, select
N
if you do not want to save your current BIOS.
Select
Y
to
Are you sure to program?
Wait until it displays
Message: Power Off or Reset the system.
Once the BIOS has been loaded successfully, remove the floppy diskette and
reboot the system holding the END key prior to power on until you enter CMOS
setup. If you do not do this the first time booting up after upgrading the BIOS,
the system will hang.
57