FIC PA-2010+, Руководство пользователя, Страница: 10 / 76

PA-2010+ Mainboard Manual
Infrared (IR) Connections
This mainboard features an IR interface that is fully compliant with the IrDA
standard. An IrDA device can be installed via a 9-pin D-type connector in the
rear panel of the computer which is linked by a cable to the onboard IrDA
pinhead.
The serial port COM2 on this mainboard is designed to be a IR compliant port.
If you wish to install the IR connection feature, you need to adjust the BIOS
option for high-speed performance. Please read page 53 of this manual.
NOTE : Both SIR and FIR are supported only if Winbond W83877AF chip
(optional) is onboard; otherwise, SIR is supported when Winbond W83877F/
TF (optional) is onboard.
Highly Convenient Integrated I/O Connectors
This mainboard features has an integrated rear I/O panel that incorporates a full
set of I/O ports to allow simple and convenient connections to a complete
selection of external peripheral devices.
In addition to two 16550A UART compatible serial ports and one EPP/ECP
capable parallel port, the panel features two USB connectors that provide high
speed connections to the new generation of USB peripheral devices. PS/2
keyboard and PS/2 mouse connectors provide additional I/O connectivity. The
photo below shows the I/O connectors:
1 . PS/2 mouse, 2. PS/2 keyboard, 3.
USB0, 4. USB1, 5. Printer, 6. COM1, 7. COM2.
8