FIC PA-2010+, Руководство пользователя, Страница: 71 / 76

PA-2010+ Mainboard Manual
IDE HDD Auto Detection
The IDE Hard Disk Drive Auto Detection feature automatically configures your
new hard disk. Use it for a quick configuration of new hard drives. This feature
allows you to set the parameters of up to four IDE HDDs. The option with
(Y)
are recommended by the system BIOS. You may also keys in your own
parameters instead of setting by the system BIOS. After all settings, press Esc
key to return the main menu. For confirmation, enter the Standard CMOS Setup
feature.
Save and Exit Setup
After you have made changes under Setup, press Esc to return to the main
menu. Move cursor to Save and Exit Setup or press F10 and then press Y to
change the CMOS Setup. If you did not change anything, press Esc again or
move cursor to Exit Without Saving and press Y to retain the Setup settings.
The following message will appear at the center of the screen to allow you to
save data to CMOS and exit the setup utility:
SAVE to CMOS and EXIT (Y/N)?
Exit without Saving
If you select this feature, the following message will appear at the center of the
screen to allow you to exit the setup utility without saving CMOS modifications:
Quit Without Saving (Y/N)?
NOTE : Default values of the various Setup items on this chapter may not
necessarily be the same ones.
56