FIBARO HC3L-001, Руководство по эксплуатации

Страница: 14 / 63

14
removIng Z-Wave DevIces
6. Leave the Only S2 classic inclusion unchecked.
7. Power the device and it will be added automatically within 10 minutes.
7: REMOVING Z-WAVE DEVICES
7.1: REMOVING DEVICES USING EXCLUSION MODE
To remove the device from the this or other Z-Wave network:
1. Open the Configuration Interface.
2. Go to
> Devices
.
3. Click .
4. Select
Z-Wave Device
.
5. Follow removing procedure on the device (according to its manual).
7.2: REMOVING Z-WAVE DEVICES (IF ADDED)
1. Open the Configuration interface.
2. Go to
> Devices .
3. Click next to the device you want to remove from the system.
4. Set learning mode duration and click Continue.
5. Follow instructions of the device.
7.3: FORCE REMOVING Z-WAVE DEVICES
1. Open the Configuration interface.
2. Go to
> Devices .
3. Click next to the device you want to remove from the system.
4. Set learning mode duration and click Continue.
5. Click which appeared in place of .
6. Confirm the action.
7. The gateway will try to communicate with the device. If the device
responds, the process will by canceled, otherwise it will be removed
from the system.v