FIBARO HC3L-001 Скачать руководство пользователя страница 9

Страница: 9 / 63

Important safety InformatIon

1: IMPORTANT SAFETY INFORMATION

Read this manual carefully before
installing and operating the product.

Warning!

• The manufacturer will not be held responsible for any loss or damage

resulting from not following the instructions. Store this manual in a
secure place for future reference.

• This product is not a toy. Keep away from children and animals.
• When wall-mounted, do not place the product higher than 2 meters

from the floor.

Caution!

• Do not attempt to disassemble, repair or modify this product yourself.

Any repair should be performed only by an authorized service.

• This product is designed for indoor use only. Do not use outside!
• Do not expose this product to moisture, water, or other liquids. Never

place any water carrying vessels near the product.

• Do not use the product outside of the recommended temperature and

humidity ranges.

• Keep the product away from heat sources and do not place under

direct sunlight.

•  Do not cover or place anything on the product.
•  Do not connect cable longer than 3 meters to the USB port.
•  Do not place the product in metal boxes or on metal surfaces for best

radio performance.

Содержание HC3L-001
































































Результаты поиска

Содержание HC3L-001

Отзывы:

Похожие инструкции для HC3L-001

Бренды по названию

Популярные бренды

FIBARO HC3L-001, Руководство по эксплуатации

Результаты поиска

Содержание HC3L-001

Отзывы:

Похожие инструкции для HC3L-001

Бренды по названию

Популярные бренды