Fiat Ducato 2021, Руководство пользователя

Страница: 128 / 368

SAFETY
126
and the warning light will switch off,
provided that the pressure of none of
the four tyres is below the insufficient
pressure limit. If the vehicle has been
stopped with the engine off for at least
20 minutes, you may need to drive the
vehicle for about 20 minutes at a speed
higher than 20 km/h to allow the TPMS
to receive this information.
WARNING
77)
The TPMS is optimised for the
original tyres and wheels provided. TPMS
pressures and alerts have been defined
according to the size of the tyres mounted
on the vehicle. Using equipment with
different size, type or kind may cause
irregular system operation or sensor
damage. Non-original spare wheels can
damage the sensor. Do not use tyre
sealant or balancing weights if the vehicle
is equipped with TPMS as these may
damage the sensors.
78) If the system signals a pressure drop
on a specific tyre, it is recommended to
check the pressure on all four tyres.
79) The TPMS does not relieve the driver
from the obligation to check the tyre
pressure every month; it is not even to
be considered a replacing system for
maintenance or a safety system.
80) Tyre pressure must be checked with
tyres cold. Should it become necessary for
whatever reason to check pressure with
warm tyres, do not reduce pressure even
though it is higher than the prescribed
value, but repeat the check when tyres are
cold.
81) The TPMS cannot indicate sudden
tyre pressure drops (for example when a
tyre bursts). In this case, stop the vehicle,
braking with caution and avoiding abrupt
steering.
82) The system only warns that the tyre
pressure is low: it is not able to inflate
them.
83)
Insufficient tyre inflation increases fuel
consumption, reduces the tread duration
and may affect your ability to drive the
vehicle safely.
84) Always refit the valve stem cap after
inspecting or adjusting tyre pressure. This
prevents dampness or dirt from entering
the valve stem and thus the pressure
control sensor from being damaged.
85)
The tyre repair kit (Fix&Go) provided
with the vehicle (for versions/markets,
where provided) is compatible with the
TPMS sensors; using sealants not
equivalent with that in the original kit may
adversely affect its operation. If sealants
not equivalent with the original one are
used, it is recommended to have the
TPMS sensor operation checked by a
qualified repair centre.
AUTONOMOUS
EMERGENCY BRAKE
CONTROL SYSTEM (AEB
Control)
(where provided)
86) 87) 88) 89) 90)
27) 28) 29) 30) 31)
This is a driving assistance system
consisting of a camera mounted in
the middle of the windscreen fig. 170
capable of intervening in case of
vehicles, cyclists and pedestrians.
In the event of an imminent collision
the system intervenes by automatically
braking the vehicle to prevent the
impact or reduce its effects.
170
F1A0998
The system provides the driver with
audible and visual signals through
specific messages on the instrument
panel display.
The warnings are intended to allow
the driver to react promptly, in order
to prevent or reduce the effects of a
potential accident.
In situations with the risk of collision, if
the system detects no intervention by
the driver, it provides automatic braking
to help slow the vehicle and mitigate
the potential frontal accident (automatic
braking).