Fiat Ducato 2021, Руководство пользователя

Страница: 187 / 368

185
manoeuvre the car out of the parking
place.
The driver controls the movements of
the vehicle using accelerator, brake
and clutch pedals (versions with
manual transmission) or accelerator
and brake pedals (versions with
automatic transmission).
The parking sensors must detect
a front obstacle (positioned at a
maximum distance of approximately
150 cm from the front bumper) and a
rear obstacle (positioned at a maximum
distance of approximately 150 cm from
the rear bumper) and the selected exit
side free for the system to be able to
manoeuvre. It is not possible for the
system to carry out the manoeuvre if
the overall parking space (front + rear),
excluding the length of the vehicle, is
less than about 1 m. In this condition,
the manoeuvre is not performed and a
dedicated message appears on the
display.
GENERAL WARNINGS
If the sensors undergo impact
which alters their position, the
system operation could deteriorate
considerably.
The system reaches top performance
after the vehicle has covered about 50
km (system "self-calibration").
If the sensors are dirty, covered by
snow, ice or mud or are repainted vs.
the original conditions, the system
operation could result strongly
degraded. It is extremely important
that the sensors are always clean
in order for the system to operate
correctly. During cleaning make sure
not to scratch or damage them; avoid
using dry or rough cloths. The sensors
should be washed using clean water
with the addition of car shampoo if
necessary. In washing stations, clean
the sensors quickly, keeping the steam
jet/high pressure washing nozzles at
least 10 cm away from the sensors.
Ultrasonic sound sources (e.g.
pneumatic brakes of trucks or air drills)
nearby could negatively influence the
sensor performance.
Sensors may detect a non-existent
obstacle (echo noise) due to
mechanical noises, for example while
washing of the vehicle, in the case of
rain, strong wind, hail.
The sensors may not detect objects
of a particular shape or made from
particular materials (very thin poles,
trailer beams, panels, nets, bushes,
parking deterrent posts, kerbs, rubbish
bins, motor cars, etc.). Always pay
the utmost care and make sure that
the vehicle and its path are really
compatible with the parking area
detected by the system.
The use of tyres (one or more) or
rims with dimensions other than those
installed on the vehicle at the factory
could affect the system operation.
If a trailer (with correctly engaged
socket) is present, the system will be
automatically disabled.
In "Search in progress" mode, the
system could incorrectly identify
a parking place to carry out the
manoeuvre (e.g. by a junction,
driveways, roads crossing the direction
of travel, etc.).
In the case of parking manoeuvres
on roads on a gradient, the
performance of the system could be
inferior and it may deactivate.
If a parking manoeuvre is being
carried out between two parked cars
alongside the pavement, the system
may cause the vehicle to mount the
pavement.
Some manoeuvres at very tight
bends might be impossible to be
carried out.
Take great care to ensure that
conditions do not change during the
parking manoeuvre (e.g. if there are
persons and/or animals in the parking
place, moving cars, etc.) and intervene
immediately if necessary.