Fiat Ducato 2021, Руководство пользователя

Страница: 36 / 368

KNOWING YOUR VEHICLE
34
the holes in the tracks; in that position
(easily found by sliding the base a little
and simultaneously pulling it out) the
seat can easily be removed fig. 70.
69
F1A0390
70
F1A0391
After the sliding and removal
operations, the seat should be refitted
and secured to the rails on the floor
before driving, as follows:
fit the base on the rails;
push the latch lever downwards
fig. 71 with sufficient force, until the
system locks.
71
F1A0392
WARNING The locking system is only
secured when the safety clip under the
lever locks it horizontally. If this does
not happen, check that the seat is in
the exact locking position in relation
to the rail (moving the seat backwards
or forwards a few millimetres until it is
properly attached). Once the quick-
release base is locked in position, it will
be as in the first stage, in other words
with the retaining lever perfectly parallel
to the floor guaranteeing that the seat
is securely fastened in the selected
position.
The seat can be turned 180º toward
the seat on the opposite side. To turn
it, see the "Seat with revolving base"
paragraph.
4-SEATER BENCH
SEAT (Crew Cab Van
versions)
(for versions/markets, where provided)
For specific versions, the vehicle
features a 4-seater rear bench seat.
The bench has a bottle holder cavity (A)
fig. 72.
The seat can be tilted manually to
allow access to the load compartment
fig. 73.
72
F1A0393
73
F1A0394