Fiat Ducato 2021, Руководство пользователя

Страница: 175 / 368

173
door, the engine can be restarted only
by using the key.
The driver is notified of this condition by
a buzzer, through the instrument panel
warning light flashing and, where
provided, by a message in the display.
ENERGY SAVING
FUNCTION
(for versions/markets, where provided)
If, after the engine has been
automatically restarted, the driver does
not take any action for a period of
about 3 minutes, the Start&Stop
system will definitively stop the engine
to avoid fuel consumption. The engine
can only be started using the key in
such cases.
NOTE
In any case, it is possible
to keep the engine running by
deactivating the Start&Stop system.
IRREGULAR OPERATION
In the event of malfunction, the
Start&Stop system is deactivated.
The driver is informed about the fault
through the switching on of the
icon together with a message on the
display. In this case, contact a Fiat
Dealership.
VEHICLE INACTIVITY
In the event of vehicle inactivity,
special attention must be paid to the
disconnection of the battery power
supply.
The procedure must be performed
by disconnecting the connector (A)
fig. 210 (pressing the button (B)) from
the sensor (C) monitoring the battery
conditions, on the negative pole (D) of
the battery. This sensor should never
be disconnected from the pole except
if the battery is replaced.
WARNING After turning the ignition key
to STOP, wait at least 1 minute before
disconnecting the electrical supply to
the battery.
143) 144)
210
F1A0137
WARNING
143) The vehicle should always be
evacuated after the key has been removed
or turned to the STOP position. When
refuelling, make sure that the vehicle is
switched off with the key in the STOP
position.
144)
If the battery needs to be replaced,
always contact a Fiat Dealership. The
replacement battery should be of the same
type (L6 105Ah/850A) and should have the
same characteristics.
IMPORTANT
48) If the vehicle is equipped with manual
climate control, if you want to favour
climate comfort, the Start&Stop system
can be deactivated for continuous climate
control system operation.