To Deactivate
A soft tap on the brake pedal, pushing the CANC button, or normal brake pressure
while slowing the vehicle will deactivate Speed Control without erasing the set speed
memory
.
Pushing the ON/OFF button or turning the ignition switch OFF erases the set
speed in memory
.
To Resume Speed
To resume a previously set speed, push the RES (+) button and release
.
Resume can be
used at any speed above 25 mph (40 km/h)
.
To Vary The Speed Setting
To Increase Speed
When the Speed Control is set, you can increase speed by pushing the RES (+) button
.
The driver’s preferred units can be selected through the Uconnect settings if equipped
.
Refer to "Uconnect Settings” in “Understanding Your Instrument Panel” in the Owner’s
Manual at www
com/en/owners/manuals for more information
.
The speed incre-
ment shown is dependent on the selected speed unit of U
.
S
.
(mph) or Metric (km/h):
U.S. Speed (mph)
•
Pushing the RES (+) button once will result in a 1 mph increase in set speed
.
Each
subsequent tap of the button results in an increase of 1 mph
.
•
If the button is continually pushed, the set speed will continue to increase until the
button is released, then the new set speed will be established
.
Metric Speed (km/h)
•
Pushing the RES (+) button once will result in a 1 km/h increase in set speed
.
Each
subsequent tap of the button results in an increase of 1 km/h
.
•
If the button is continually pushed, the set speed will continue to increase until the
button is released, then the new set speed will be established
.
OPERATING YOUR VEHICLE
63
