3
.
Press the “Up” or “Down” arrows to adjust the hours or minutes, then select the
“AM” or “PM” button on the touchscreen
.
You can also select 12hr or 24hr format by
pressing the desired button on the touchscreen
.
4
.
Once the time is set press the “Done” button on the touchscreen to exit the time
screen
.
NOTE:
In the Clock Setting Menu you can also select Display Clock
.
Display Clock turns the
clock display in the status bar on or off
.
Equalizer, Balance And Fade
1
.
Push the MORE button on the faceplate below the display then press the “Setting”
button on the touchscreen
.
2
.
Scroll down and press the “Audio” button on the touchscreen to open the Audio
menu
.
3
.
The Audio Menu shows the following options for you to customize your audio settings
.
Equalizer
•
Press the “Equalizer” button on the touchscreen to adjust the Bass, Mid and Treble
.
Use the “+” or “-” button on the touchscreen to adjust the equalizer to your desired
settings
.
Balance/Fade
•
Press the “Balance/Fade” button on the touchscreen to adjust the sound from the
speakers
.
Use the arrow buttons on the touchscreen to adjust the sound level from
the front and rear or right and left side speakers
.
Press the Center “C” button on the
touchscreen to reset the balance and fade to the factory setting
.
Speed Adjusted Volume — If Equipped
•
Press the “Speed Adjusted Volume” button on the touchscreen to select between OFF,
1, 2 or 3
.
This will decrease the radio volume relative to a decrease in vehicle speed
.
Loudness
•
Press the “Loudness” button on the touchscreen to select the Loudness feature
.
When
this feature is activated it improves sound quality at lower volumes
.
Surround Sound — If Equipped
•
Press the “Surround Sound” button on the touchscreen, select On or Off followed by
pressing the back arrow button on the touchscreen
.
When this feature is activated, it
provides simulated surround sound mode
.
ELECTRONICS
75
