Setting The Time
Model 6
.
5 NAV synchronizes time automatically via GPS, so should not require any time
adjustment
.
If you do need to set the time manually, follow the instructions below
.
•
For Model 6
.
5 NAV, turn the unit on, then press the time display at the top of the
screen
.
Press “Yes
.
”
•
If the time is not displayed at the top of the screen, press the Settings button
.
In the
Settings screen, press the “Clock” button on the touchscreen, then check or uncheck
this option
.
•
Press “+” or “–” next to Set Time Hours and Set Time Minutes to adjust the time
.
•
If these features are not available, press “Off “for Sync with GPS
.
•
Press “X” to save your settings and exit out of the Clock Setting screen
.
Audio Settings
•
Press the “Audio” button on the touchscreen to activate the Audio settings screen to
adjust Balance\Fade, Equalizer, and Speed Adjusted Volume
.
•
You can return to the Radio screen by pressing the “X” located at the top right
.
Balance/Fade
•
Press the “Balance/Fade” button on the touchscreen to Balance audio between the
front speakers or fade the audio between the rear and front speakers
.
•
Pressing the “Front,” “Rear,” “Left,” or “Right” buttons on the touchscreen or press and
drag the Speaker Icon to adjust the Balance/Fade
.
Equalizer
•
Press the “Equalizer” button on the touchscreen to activate the Equalizer screen
.
•
Press the “+” or “-” buttons on the touchscreen, or press and drag over the level bar
for each of the equalizer bands
.
The level value, which spans between plus or minus
nine, is displayed at the bottom of each of the Bands
.
Speed Adjusted Volume — If Equipped
•
Press the “Speed Adjusted Volume” button on the touchscreen to activate the Speed
Adjusted Volume screen
.
The Speed Adjusted Volume is adjusted by pressing the “+”
and “–” buttons or by pressing and dragging over the level bar
.
This alters the auto-
matic adjustment of the audio volume with variation to vehicle speed
.
Surround Sound — If Equipped
•
Press the “Surround Sound” button on the touchscreen, select “On” or “Off” followed
by pressing the back arrow button on the touchscreen
.
When this feature is activated,
it provides simulated surround sound mode
.
ELECTRONICS
87
