3
.
Before raising the vehicle, use the wheel bolt wrench to loosen, but not remove, the
wheel bolts on the wheel with the flat tire
.
Turn the wheel bolts counterclockwise
one turn while the wheel is still on the ground
.
NOTE:
There are front and rear jacking locations
on each side of the body (as indicated by
the traingular lift point symbols on the sill
molding)
.
4
.
Place the jack underneath the lift area
that is closest to the flat tire
.
Turn the
jack screw clockwise to firmly engage
the jack saddle with the lift area of the
sill flange, centering the jack saddle be-
tween the locating notches on the sill
flange
.
5
.
Raise the vehicle just enough to remove
the flat tire and install the spare tire
.
WARNING!
Raising the vehicle higher than necessary can make the vehicle less stable
.
It could slip
off the jack and hurt someone near it
.
Raise the vehicle only enough to remove the
tire
.
6
.
Remove the wheel bolts and tire
.
7
.
Mount the spare tire
.
Front Jacking Location
Rear Jacking Location
WHAT TO DO IN EMERGENCIES
113
