To Set A Desired Speed
Turn the Electronic Speed Control on
.
When the vehicle has reached the desired speed,
push the SET (-) button and release
.
Release the accelerator and the vehicle will operate
at the selected speed
.
NOTE:
The vehicle should be traveling at a steady speed and on level ground before pushing the
SET (-) button
.
To Deactivate
A soft tap on the brake pedal, pushing the CANC button, or normal brake pressure
while slowing the vehicle will deactivate Electronic Speed Control without erasing the set
speed memory
.
Pushing the on/off button or turning the ignition switch OFF erases the
set speed in memory
.
To Resume Speed
To resume a previously set speed, push the RES (+) button and release
.
Resume can be
used at any speed above 25 mph (40 km/h)
.
To Vary The Speed Setting
To Increase Speed
When the Electronic Speed Control is set, you can increase speed by pushing the RES (+)
button
.
The driver’s preferred units can be selected through the instrument panel settings if
equipped
.
Refer to "Programmable Features” in “Understanding Your Instrument Panel” in
the Owner’s Manual on the DVD for more information
.
The speed increment shown is
dependent on the selected speed unit of U
.
S
.
(mph) or Metric (km/h):
U.S. Speed (mph)
•
Pushing the RES (+) button once will result in a 1 mph increase in set speed
.
Each
subsequent tap of the button results in an increase of 1 mph
.
•
If the button is continually pushed, the set speed will continue to increase until the
button is released, then the new set speed will be established
.
Metric Speed (km/h)
•
Pushing the RES (+) button once will result in a 1 km/h increase in set speed
.
Each
subsequent tap of the button results in an increase of 1 km/h
.
•
If the button is continually pushed, the set speed will continue to increase until the
button is released, then the new set speed will be established
.
To Decrease Speed
When the Electronic Speed Control is set, you can decrease speed by pushing the SET (-)
button
.
OPERATING YOUR VEHICLE
34
