Festo VTSA Series, Руководство пользователя

Страница: 132 / 166

5. Maintenance and conversion
5−24
Festo P.BE−VTSA−44−EN en 0601a
Fitting Proceed as follows:
1. Fit the new manifold block and, if applicable, a further
pneumatic supply plate (see section 5.3.4).
2. Fit the relevant components, e.g. vertical stacking compo
nents, valves or cover plates onto the empty valve loca
tions (see section 5.3.2 for fitting vertical stacking compo
nents and section 5.3.4 for fitting valves or cover plates).
3. Fit the valve terminal onto the fastening surface (see
chapter 2 Fitting, Fitting onto a wall" or Fitting onto a
hat rail").
4. Then complete the pneumatic and electrical connections
(see chapter 3 Installation, Connecting the VTSA valve
terminal").