Festo VAEM-L1-S Series, Инструкция по эксплуатации

Страница: 9 / 18

ID Parameter Instance-
s Data
type Access
1)
Arraysize
20022 Configuration of voltage monitoring load
supply PL
–
0: load voltage monitoring inactive
– 1: load voltage monitoring active, with
suppression of diagnostics at switch-
off (factory setting)
– 2: load voltage monitoring active
1 UINT8 rw
–
20052 Behaviour in error state (communication
fault)
–
0: reset outputs (factory setting)
– 1: maintain status
1 UINT8 rw
–
20085 Measured value temperature AP-ASIC [°C] 1 INT16 ro
–
20087 Current measured value of logic supply PS
[mV] 1 UINT16 ro
–
20088 Current measured value of load supply PL
[mV] 1 UINT16 ro
–
20093 Hardware version 1 UINT8 ro
–
1) ro = read only; rw = read write
Tab. 9 Parameter
10 Diagnostics and fault clearance
10.1 Diagnostic messages
ID hex (dec) Message Description
Undervoltage of the logic supply PS 24 V DC was detec-
ted.
Remedy – Check logic supply PS.
02
|
01
|
0016
(33619990)
Undervoltage in logic
supply PS 24 V DC
Diagnost-
ic status Warning
Error
Overvoltage in the logic supply PS 24 V DC detected.
Remedy – Check logic supply PS.
02
|
01
|
0017
(33619991)
Overvoltage in logic
supply PS 24 V DC
Diagnost-
ic status Error
Diagnostics and fault clearance
9 Festo — VAEM-L1-S-...-AP — 2019-06