Festo VAEM-L1-S Series, Инструкция по эксплуатации

Страница: 8 / 18

7 Installation
• Carry out the installation according to the "Instruction manual for automation system
CPX-AP"
è 1.1 Applicable documents.
• Connect the earthing cable to the earth terminal of the valve terminal in accordance with the
"Brief description of valve terminal VTUG-...-M/VTUG-...-V"
è 1.1 Applicable documents.
8 Commissioning
• Commission the automation system CPX-AP in accordance with the "Instruction manual for auto-
mation system CPX-AP"
è 1.1 Applicable documents.
Behaviour of the display components of the module after error-free commissioning
[MD] [PL]
Illuminated green Illuminated green
Tab. 8 Behaviour of the LED displays of the module after error-free commissioning
Information on troubleshooting in the event of incorrect behaviour:
è Instruction manual for automation system CPX-AP
è 10 Diagnostics and fault clearance
9 Parameterisation
Various parameters are available for reading out information about the modules in an automation sys-
tem CPX-AP and adapting the modules to the application situation.
Write access to the parameters is typically performed by the higher-level controller using the device
descriptions specific to the host system.
ID Parameter Instance-
s Data
type Access
1)
Arraysize
70 Part number 1 UINT32 ro
–
246 Fieldbus serial number 1 UINT32 ro
–
791 Product key 1 CHAR ro 12
960 Firmware version 1 CHAR ro 30
20000 Module code 1 UINT32 ro
–
Installation
8 Festo — VAEM-L1-S-...-AP — 2019-06