Festo Smart cubic CPVSC1-VI, Руководство пользователя

Страница: 59 / 92

4. Commissioning
4−9
Festo P.BE−CPVSC−E N en 0301a
Warning
Before actuating the manual override:
Uncontrolled actuation of the valve solenoid coils can
cause the actuators to perform sudden unexpected move
ments which may cause injury to human beings and dam
age to property.
·
Disconnect the power supply for the valve solenoid coils
from the multipin connection.
You will thereby avoid undesired actuation of the valve
solenoid coils.
Before switching on the power supply:
During commissioning, manual override actuations which
are in the switched state can cause actuators to perform
sudden unexpected movements. These movements can
cause injury to human beings and damage to property.
·
Make sure that all manual override actuations are in
their basic positions.
You will thereby avoid undefined switching states of the
valves.
Proceed as follows:
Warning
Before checking the valve−actuator combination:
Make sure that nobody is in the danger zone.
1. Switch on the compressed air supply.
2. Check the functioning and effects of each individual valve−
actuator combination by actuating the manual override as
shown in the following diagrams.
3. Make sure that all the valves are in their basic positions
before commissioning the valve terminal.
4. Switch off the compressed air supply after checking the
valves.