Festo SDE1 Series, Руководство по эксплуатации

Страница: 47 / 64

SDE1−...
Festo SDE1−... 0511e English
47
Symbols on the display Description
SDE1−...−C SDE1−...−L
Out A Out B Out A Out B
Switching output A / switching output B
/
/
Switching output set/not set
Threshold comparator
Window comparator
[SP] Switching pressure
[SP] [min] Lower switching pressure
[SP] [max] Upper switching pressure
[HY] Hysteresis
[NO] Normally open contact
[NC] Normally closed contact
[min] Minimum measuring pressure
[max] Maximum measuring pressure
[lock] [lock] Security code active
(blocks unauthorised programming)
Segments light up: graphic display of the current
measured value in relation to the max. measured
value of the measuring range.
[min][max] [min] and [max] or 2 segments flashing:
Minimum/maximum value is being reset
3 segments flashing:
Hysteresis value is being displayed
1 segment flashing − the following is shown:
Segment 5: switching point SP or SP.L
Segment 8: switching point SP.H
Segment 1: minimum value (min/P.Lo)
Segment 10: maximum value (max/P.Hi)
Fig.14