Festo MTR-DCI, Руководство пользователя

Страница: 69 / 184

} Settings
}
Axis type
Axis param
Homing param
Position set
Password
4. Control panel (MTR−DCI−...−H2IO)
4−11
Festo P.BE−MTR−DCI−IO−EN en 0606b
4.2.3 Menu [Settings]
Warning
Damage to or impairment of the mechanical components
With all teach procedures the motor turns or the connected
axis starts to move.
·
Make sure that:
nobody can place his/her hand in the positioning
range
there are no objects in the positioning range.
Parametrizing the axis system and programming the position
sets:
1. Select [Settings] in the main menu with the arrow buttons
and press the <Enter> button.
2. Select:
the axis type [Axis type]
the axis parameters [Axis param]
the referencing parameters [Homing param]
the position set table [Position set]
the password setting [Password].
[Axis type] Design of the axis driven by the MTR−DCI (parameters see
chapter 5.2.1)
[Axis type] Description
[type DMES−...] Festo servo axis
[Rotation drive] Specific rotation axis
[User config] Specific linear axis
[Save...] Save parameter in EEPROM