Festo MS6-SV-***-E-ASIS Series, Руководство по эксплуатации

Страница: 49 / 60

MS6(N)-SV-...-E-ASIS
Festo – MS6(N)-SV-...-E-ASIS – 1205NH English 49
8 Operation
Note
In its process-reliable (i.e. pressurised) state, the mechanical system of the
MS6(N)-SV-...-E-ASIS is not tested.
• Perform a forced switch-off if the process does not ensure the switching frequency
of at least once per month (monitoring via AS-i object 00/month counter possible).
Note
When designing the system, observe the maximum switching frequency and service life
characteristic of the product to ensure an optimal availability 14 Technical data.
9 Maintenance and care
• Switch off the following energy sources before cleaning the exterior of the device:
– Operating voltage
– Compressed air
• If needed, clean the product from outside.
Soap suds (max. +50 °C), petroleum ether and all non-abrasive cleaning agents may be used.
10 Disassembly
1. Switch off the following sources of energy before disassembly:
– Operating voltage
– Compressed air
Caution
Danger of injury due to residual pressure in the system
If a commercially-available silencer is used, the body of the silencer may become
clogged, which can result in reduced exhaust performance and back pressure.
• Use the safety silencer designed for the product 12 Accessories.
• Only use a commercially-available silencer if it will be maintained at regular intervals
by service staff and only in combination with a back pressure monitoring system.
2. Disconnect the relevant connections from the MS6(N)-SV-…-E-ASIS.