1
Safety and requirements for product use
Festo – P.BE-MPA-EN – 1309f – English
11
1.2
Requirements for product use
•
Make this documentation available to the design engineer, installer and personnel responsible for
commissioning the machine or system in which this product is used.
•
Make sure that the specifications of the documentation are always complied with. Also consider the
documentation for the other components and modules.
•
Take into consideration the legal regulations applicable for the destination, as well as:
–
regulations and standards,
–
regulations of the testing organizations and insurers,
–
national specifications.
1.2.1
Technical requirements
General conditions for the correct and safe use of the product, which must be observed at all times:
•
Comply with the connection and environmental conditions specified in the technical data of the
product (
appendix A) and of all connected components.
Only compliance with the limit values or load limits permits operation of the product in accordance
with the relevant safety regulations.
•
Observe the instructions and warnings in this documentation.
1.2.2
Qualification of the specialists (requirements for the personnel)
The product may only be commissioned by trained control and automation technology professionals,
who are familiar with:
–
installation and operation of control and automation systems,
–
the applicable regulations for accident protection and industrial safety, and
–
the documentation for the product.
1.2.3
Range of application and certifications
Standards and test values which the product complies with and fulfils can be found in the “Technical
data” section (
Appendix A). The product-relevant EU directives can be found in the declaration of
conformity.
Certificates and the declaration of conformity for this product can be found at
www.festo.com.
The product fulfils the requirements of EU directives and is marked with the CE certification.
Содержание MPA-S
Страница 165: ...C Glossary Festo P BE MPA EN 1309f English 165 C Glossary...
Страница 168: ...C Glossary 168 Festo P BE MPA EN 1309f English...
Страница 172: ...MPA S 172 Festo P BE MPA EN 1309f English...
Страница 173: ......