Festo MPA-ASI Series, Руководство пользователя

Страница: 93 / 208

3. Installation
3−23
Festo P.BE−MPA−EN en 0802c
Tubing Connection code
(ISO 5599) Connection size
(ISO 228) Connection
1)
Compressed air
or vacuum 1 G¼" Screw connector in the
pneumatic interface, in the
multipin sub−base or in the
pneumatic supply plate
Pilot air
(external pilot air supply) 12/14 M7 Screw connector in the
pneumatic interface or in the
multipin sub−base
Ducted exhaust
from the valves 3/5 QS10 Screw connector in exhaust
plate
2)
Ducted exhaust
from the pilot control 82/84 M7 Screw connector in the
supply plate
2)
Work air or vacuum 2 or 4 MPA1: M7
MPA2: G
Á
"
Screw connector in the
sub−base
Connection for external
pressure P1 M7 Screw connector in pressure
sensor plate
typeVMPA−FB−PS−P1
Pressure input
Pressure output
Exhaust of the VPPM−6TA 1
2
3 G ¼"
G ¼"
G ¼" Screw connector in the
sub−base of the proportional
pressure regulator
1)
Depending on what you have ordered, the MPA−S valve terminal may already be fitted with
QSscrew connectors.
2)
Only with MPA−S valve terminals with exhaust plate or supply plate
Tab.3/4: Assignment of the connections
Observe the following instructions on installing the pneu
matic components. Only then can you guarantee faultless
operation.