Festo MPA-ASI Series, Руководство пользователя

Страница: 16 / 208

Contents and general instructions
XIV
Festo P.BE−MPA−EN en 0802c
The following product−specific terms and abbreviations are
used in this manual:
Term/abbreviation Meaning
Basic components Component (pneumatic interface, multipin sub−base, pneumatic
sub−base or pneumatic supply plate) on which further components
(exhaust plates, large surface−mounted silencers, pressure regulators,
valves or cover plates) are fitted
Components Common term for pneumatic interface, multipin sub−base, exhaust
plate, large surface−mounted silencer, pneumatic sub−base or
pneumatic supply plate, electric supply plate, pressure sensor plate,
proportional pressure regulator, end plate, pressure regulator plate,
valve and cover plate
Connecting the tubing Connecting the pneumatic supply lines (tubing) to the MPA−S valve
terminal
Cover plate Plate without valve function for sealing non−used valve locations on
sub−bases
CPX module Common term for the various modules which can be incorporated in a
CPX terminal
CPX terminal Modular electric terminal type 50 or type 53
Electric supply plate Plate for additional supply of the valves with load voltage
Electronic module Module in the sub−base with LED and valve coil management
End plate Extreme right−hand plate of the MPA−S valve terminal and extreme
left−hand plate of the CPX terminal with holes for fitting onto a wall
Exhaust plate Plate for ducted exhaust with connection 3/5
Sub−base Plate for 4 valve locations for single−solenoid, double−solenoid or
mid−position valves, with work connections 2 and 4
size MPA1 (type MPAS...4) with 4 valve locations
size MPA2 (type MPAS...2) with 2 valve locations
I/O Input/Output modules
Isolating seal Special seals for forming pressure zones