Festo MPA-ASI Series, Руководство пользователя

Страница: 9 / 208

Contents and general instructions
VII
Festo P.BE−MPA−EN en 0802c
Designated use
The MPA−S valve terminals described in this manual are
intended for fitting into a machine or automated system.
The user must at all times observe the safety regulations
specified in this manual as well as the instructions concerning
the designated use of the relevant MPA−S valve terminal. The
MPA−S valve terminals may only be used as follows:
as designated in industrial applications
without any modifications by the user.
Only the conversions or modifications described in the
documentation accompanying the product are permitted.
In perfect technical condition.
When used together with commercially available compo
nents, such as actuators, the specified limits for pressures,
temperatures, electrical data, torques etc. must be observed.
National and local safety regulations must also be observed.
Areas of application and approval by authorities
The product fulfils the requirements of the EU guidelines and
is marked with the CE identification.
Standards and test values, which the product must observe
and fulfil, can be found in the section Technical specifica
tions". The product−relevant EU directive can be found in the
conformity declaration.
Certain configurations of the product have been approved by
the Underwriters Laboratories Inc. (UL) for the USA and
Canada. These configurations are marked as follows: