Festo MPA-ASI Series, Руководство пользователя

Страница: 73 / 208

3. Installation
3−3
Festo P.BE−MPA−EN en 0802c
Contents of this chapter This chapter describes the tubing and cabling of the MPA−S
valve terminal. The following belong here:
General instructions on preparing the compressed air and
on connecting the tubing
Instructions on pilot control of the valve solenoid coils
with internal or external pilot air
Instructions on operating the MPA−S valve terminal with
pressure zone separation
Fitting the QS screw connectors
Connecting the power supply
Earthing the MPA−S valve terminal
Address assignment of the valves
Further information Instructions on connecting the electric elements of the MPA−S
valve terminal with multipin connection can be found in the
leaflet supplied with the product.
Requirements for observing the certified UL conditions if the
product is operated in the USA or Canada can be found in the
separate special UL−specific documentation.
Instructions on connecting the operating voltage can be
found in the system manual for your CPX terminal.
Detailed instructions on connecting the CPX modules (bus
node, I/O modules etc.) can be found in the relevant manuals
for the CPX module (see system manual for your CPX terminal,
table Manuals on the CPX terminal").
Detailed instructions on addressing the pneumatic modules
of the MPA−S valve terminal with CPX terminal can be found in
the electronics manual for the module (see system manual
foryour CPX terminal, table Manuals on the CPX terminal").